HOW TO GET RID
OF BLACK MOLD
Finding black mold in your home is a homeowner’s worst nightmare. Not only does it look unsightly, but it can also smell terrible, and many people believe that it spreads disease. While the latter may not be true, it certainly can spread itself – meaning you need to remove it before you have a full infestation.
The good news is that removing black mold is not a difficult task. If you have a major infestation, you may need to get professional help. However, if the black mold is in a small area, then it’s a task you can complete yourself in an afternoon.
This guide will demonstrate the different options for removing black mold and show you how commonly-available cleaning products can be a cheap – and eco-friendly – option for you, your family, and your home.
WHAT IS BLACK MOLD?
Black mold – or Stachybotrys chartarum – is a fungus that exists very rarely in nature, but flourishes inside human homes. It feeds off cellulose, meaning that it grows on surfaces such as wallpaper, gypsum, and other paper-based products.
Black mold has a reputation for causing sickness as a result of the mycotoxins that it produces. However, while mold spores of all types have been connected with allergic reactions, irritation, and respiratory problems, there is no conclusive evidence that black mold is worse than other forms.
For a more detailed rundown on black mold, see our comprehensive guide – What is Black Mold.
Although this guide is focused on how to remove black mold that is already present, the best long-term tactic is to remove the conditions in which black mold can thrive.
BLACK MOLD REQUIRES FOUR ELEMENTS TO BE PRESENT IN ORDER TO GROW:
Temperatures between 41 and 104 degrees Fahrenheit.
In order to get rid of black mold yourself, you will need to take several steps in preparation. You need to make sure of two things: firstly, that you have protected your body from the effects of both the cleaning product and the mold; secondly, that you will not spread the mold into other parts of your house as you clean it.
The bare minimum protective equipment you should wear is:
On top of this, you should also wear clothes that you can disinfect post-use. Overalls are preferable. You should have long sleeves and ensure your arms, legs, and head are covered.
SEAL THE ROOM
Once you enter the room with the mold, you need to seal it off to prevent spores from entering other rooms as you clean. To do this, place heavy plastic sheeting over the doors and openings and tape it down with duct tape. For this reason, you will need to complete the job in one go.
You should also have a heavy-duty garbage bag ready for your equipment. Once you have finished, seal everything in this bag and remove it from the building through as few rooms as possible (dropping it out the window may be the best option) so as not to risk contamination.
Although there are specialist mold removers on the market, you can remove black mold using household equipment. Below is an overview of the different products available, and how to use them.
Ammonia is a common cleaning solution – available readily in most grocery stores. Ammonia is often used in industrial cleaning and has a distinct smell. A 64 oz. bottle of ammonia will cost somewhere between $20 and $50.
HOW TO USE IT:
As well as your protective equipment, you will need to use a respirator if you are working with ammonia. Ensure the windows are open in the room you are in (don’t open the doors as the mold spores may spread).
Mix equal parts ammonia and water in a spray bottle.
It is better to use a new bottle or one that has not contained bleach. If you have used a bleach solution previously, clean the bottle thoroughly, and add the water before the ammonia.
Spray the areas where the black mold is visible.
(as well as the surrounding areas)
Let the solution rest on the surface for 10 minutes.
Use a brush to clean the mold.
Then use a clean cloth to wipe the area clean.
Once the area is clean, repeat the process to ensure you removed all of the mold.
Repeat in the future if the mold returns.
Bleach works in exactly the same way as ammonia. The only additional points to note are:
TEA TREE OIL
Unlike ammonia or bleach, tea tree oil is not harmful to the environment or dangerous to inhale. Furthermore, it is a natural fungicide, meaning it will have many of the same effects.
HOW TO USE IT:
Because tea tree oil does not give off harsh fumes, you will not need to wear a respirator or a face mask, but you should still have your hands and eyes covered.
Add 1 teaspoon of tea tree oil to 1 cup of water
Add the mixture to a spray bottle
Spray the bottle on the mold
Wait for it to sit for 30 seconds, then wipe the area with a cloth
You can also use this process as a nice-smelling preventative measure around the grout in your bathroom. Spray regularly to ensure that the mold does not return.
Another item you may have around your home is Borax. Borax is used as a household cleaner and can remove odors, clean, and disinfect – so it makes sense that it works against black mold.